My system is
Dell Optiplex 7060
Intel(R) Core™ i5-8500 CPU @ 3.00GHz 3.00 GHz
64-bit operating system, x64-based processor
8.00 GB RAM
Windows 11 Pro, 24H2
After I start Obsidian on my system, I open command prompt as admin and run the command:
powercfg /energy
In the generated report I see this warning:
Please check this.
Warnings
Platform Timer Resolution:Outstanding Timer Request
A program or service has requested a timer resolution smaller than the platform maximum timer resolution.
| Requested Period | 10000 |
|---|---|
| Requesting Process ID | 12488 |
| Requesting Process Path | \Device\HarddiskVolume5\Users\Elinson\AppData\Local\Programs\Obsidian\Obsidian.exe |
Power Policy:Display timeout is long (Plugged In)
The display is configured to turn off after longer than 10 minutes.
Timeout (seconds) 900
CPU Utilization:Analysis Error
Analysis was partially unsuccessful. Some results are available, but they may be incomplete.
Information
Platform Timer Resolution:Platform Timer Resolution
The default platform timer resolution is 15.6ms (15625000ns) and should be used whenever the system is idle. If the timer resolution is increased, processor power management technologies may not be effective. The timer resolution may be increased due to multimedia playback or graphical animations.
Current Timer Resolution (100ns units) 156250
Platform Timer Resolution:Timer Request Stack
The stack of modules responsible for the lowest platform timer setting in this process.
| Requested Period | 10000 |
|---|---|
| Requesting Process ID | 12488 |
| Requesting Process Path | \Device\HarddiskVolume5\Users\Elinson\AppData\Local\Programs\Obsidian\Obsidian.exe |
| Calling Module Stack | \Device\HarddiskVolume5\Windows\System32\ntdll.dll |
| \Device\HarddiskVolume5\Windows\System32\kernel32.dll | |
| \Device\HarddiskVolume5\Users\Elinson\AppData\Local\Programs\Obsidian\Obsidian.exe | |
| \Device\HarddiskVolume5\Windows\System32\kernel32.dll | |
| \Device\HarddiskVolume5\Windows\System32\ntdll.dll |